Number Feature
Function
1
Function setting LED
Displays the current operating mode.
2
Function buttons
Menu buttons to control the operating mode of the laser.
3
Microphone
Mic for Sound-to-Light operation.
4
DMX output
3 pin XLR connector for DMX512 output communication.
5
DMX input
3 pin XLR connector for DMX512 input communication.
6
Power supply output
Mains supply output for linking power to other units.
7
Power supply input
Attach the mains cable here. Built-in fuse.
8
Cooling vents
Do not cover.
Function setting
Using the four function buttons on the rear of the unit you can set the operating mode of the Powercan. Press the
Menu
button to
display the different functions (see table below for a description of the functions). Use the
Up
or
Down
arrow buttons to make
your selection. When you have chosen your desired mode, press the
Enter
button to confirm the change.
DMX address setting
When controlling the unit (or units) with a DMX controller, each one must be set with a specific DMX address. You can choose to
set all units with the same DMX address or you can set every unit with its own DMX address. If all units are set with the same
DMX address all units will be synchronised and operate in the same way, you cannot control each unit separately.
If you set each unit with a different DMX address, they will receive the DMX signal from their own DMX address. You will now be
able to control each unit individually. The DMX address that you set for each unit must be determined by the number of channels.
This unit has 4 or 8 channels, therefore if you choose the 4 channel mode, you should set the starting address of the first unit to
1, the second unit must then be set to 5 (4+1), the third unit must be set to 9 (4+5) and so on. If you choose the 8 channel mode,
you should set the starting address of the first unit to 1, the second unit must then be set to 9 (8+1), the third unit must be set to
17 (8+9) and so on.
Menu display
Function
Addr
DMX address setting. This is changed using the
Up
or
Down
arrow buttons (1-512).
CHNd
4CH - press the
Enter
button to choose 4 channel DMX operation.
8CH - press the
Enter
button to choose 8 channel DMX operation.
NAnu
rEd - press the
Enter
button / 0-255 red dimmer.
GrEE - press the
Enter
button / 0-255 green dimmer.
bLUE - press the
Enter
button / 0-255 blue dimmer.
UhtE - press the
Enter
button / 0-255 white dimmer.
SHOU
SH1 - SH7. Built-in shows.
COLO
CO1 – CO15. Manual colour selection.
SPEE
Auto speed setting from 01-99.
Auto
Auto mode.
Soun
Sound-to-Light mode. Press the
Enter
button to choose the sensitivity of the microphone (S01-S10).
Temp
The LED output power will reduce when the unit’s temperature increases towards 50°C.
Ve1.0
Software version Ve1.0
