KAM PAR56 V2, Инструкция по эксплуатации

Страница: 4 / 5

Setting DMX address
To activate the DMX mode
Dipswitch 10 must be in the on position
Use dipswitch 1-9 to set address requires
Each unit uses 7 DMX channels
If all units are to be controlled exactly the same set all units with the same DMX address
If individual control of each unit is required, set all units with its own DMX address
Remember all DMX addresses must be at least 7 channels apart and no DMX channels should cross
For example, unit 1 set to address 1 unit 2 set to address 8 unit 3 set to 15 and so on.
Please note : to operate DMX CH7 Dimmer must have a value.
DMX Control
Channel Value Function
CH1 000-255 Red( 0%~100%)
CH2 000-255 Green( 0%~100%)
CH3 000-255 Blue( 0%~100%)
CH4
000-007 Blackout
008-015 Red 100% Green 20%
016-023 Red 100% Green 40%
024-031 Red 100% Green 60%
032-039 Red 100% Green 80%
040-047 Red 100% Green 100%
048-055 Green 100%
056-063 Green 100% Blue 20%
064-071 Green 100% Blue 40%
072-079 Green 100% Blue 60%
080-087 Green 100% Blue 80%
088-095 Green 100% Blue 100%
096-103 Blue 100%
104-111 Red 20% Blue 100%
112-119 Red 40% Blue 100%
120-127 Red 60% Blue 100%
128-135 Red 80% Blue 100%
136-143 Red 100% Blue 100%
144-151 Red 100% Green 25% Blue 100%
152-159 Red 100% Green 50% Blue 100%
160-167 Red 100% Green 75% Blue 100%
168-175 Red 100% Green 100% Blue 100%
176-183 Red 100% Green 100% Blue 25%
184-191 Red 100% Green 100% Blue 50%
192-199 Red 100% Green 100% Blue 75%
200-207 Red 100% Green 100% Blue 100%
208-215 Red 20% Green 100% Blue 100%
216-223 Red 40% Green 100% Blue 100%
224-231 Red 60% Green 100% Blue 100%
232-239 Red 80% Green 100% Blue 100%
240-247 Red 100% Green 100% Blue 100%
248-255 Red 50% Green 50% Blue 50%