REAR PANEL
FUNCTION TABLE:
1
MIC
Audio in
2
VOLUME
Volume sensitivity
3
Mode Message centre
Indicating the state of SD card controlling system
4
SD Card Controlling Settings
Used to set some important parameters for SD card
5
SD Card Slot
SD Card (maximum capacity of 1 Gigabytes support)
6
Mode Switches
Select the operating modes
7
DMX IN
DMX 512 signal input
8
DMX OUT
DMX 512 signal output
9
Dip Switches
Setting the DMX start address
10
ILDA IN
ILDA standard signal input
11
ILDA THRU
ILDA standard signal through
12
ON/OFF
Key switch safety power shut off
13
AC IN and Fuse
AC 110-240V 50/60Hz
OPERATING INSTRUCTIONS
Sound & DMX Control mode
You can choose Sound or DMX control mode through dipswitch 10:
When all dipswitches are set to the OFF position, the unit works in sound mode.
When dipswitch 1 is set to the ON position, the unit works in auto mode.
To set unit to slave set dipswitch 2 to the on position
