KAM Energy SD1, Инструкция по эксплуатации

Страница: 10 / 12

ILD mode or play list
Channel Value Function
CH2 000-255 Sound-to-Light microphone sensitivity control
CH3 - -
CH4 000-255 Select the SD card folder
CH5 000-255 ILD file folder or play the file LIST
Important: In channel 1 in DMX mode when the value is below 200 it coresspondes with the ILD mode or playlist above with the
above channels 1-5. However when the value goes above 200 i.e. 201, then channel 2-5 correspond to the DMX programming
mode that can be found in the table below.
With DMX channel 1 the value being above 201, the laser becomes 24-channel operation set into two sections. The reason for
the two sections is that this Energy SD1 laser will allow pattern shape overlay. DMX channels 3-14 give you full control on the first
layer of patterns, 15-24 will give you full control of the second layer of patterns. The two-default channel modes 5 channel and 24
channels provide independent control of the SD playback feature and dual layer independent pattern control.
DMX programming mode
Image
layer
Channel Value Function
Pa
tte
rn
Im
ag
e
O
ne
CH2 000-255 Sound-to-Light microphone sensitivity control
CH3
pattern
mode
selection
000 Laser black out
0001-049 Pattern out through the mode. Channel values of 1-6 will see the pattern shrink
050-099
Pattern out of bounds foldback mode. Channel values of 51-56 will see the
pattern shrink
100-149
Pattern out through the mode. Channel values of 101-106 will see the pattern
shrink
150-199
Pattern out of bounds foldback mode. Channel values of 151-156 will see the
pattern shrink
200-255
Pattern out of bounds reentrant mode. Channel values of 201-206 / 251-256 will
see the pattern shrink
CH4 000-255 Total of 128 patterns, each 2 values become one pattern
CH5
shrinking
000-063 Adjusts the size of the pattern manually
064-191 Zooms in and out to morph the image
160-192 Shrinking
192-223 Enlarging
224-255 Zooms back and forth (largest to smallest)
CH6
rotation
000-063 Adjusts the angle of rotation manually
064-191 Bends, stretches and morphs the image
192-223 Clockwise rotation
224-255 Anti-clockwise rotation
CH7
horizontal
000-063 Manually adjusts the horizontal movement
064-255 Bends, stretches and morphs the image
CH8
vertical
000-063 Manually adjusts the vertical movement
064-255 Bends, stretches and morphs the image
CH9
horizontal
shrinking
000-063 Manually adjusts the Y axis position
064-255 Bends, stretches and morphs the image
CH10 000-063 Manually adjusts the X axis position