Strobe
Selecting the strobe function.
Press the
Strobe
button (the LED will illuminate to confirm the function selection)
Use fader 2 to adjust the flash rate; 0% = slow / 100% = fast.
Chases
This function allows the user to select one of the built-in chase programs.
Press the
Chases
button (the LED will illuminate to confirm the function selection).
Adjust the channel 3 fader to set the desired brightness.
Adjust channel 2 fader to select the speed of the chase.
Adjust channel 1 to select one of the desired built-in chase sequence.
Sound-to-Light activation
The chases can be controlled via sound activation.
Press the
Sound
button (the LED will illuminate to confirm the function selection).
Using the sensitivity control knob, adjust the built-in microphone sensitivity to the desired level.
Anti-clockwise = maximum / clockwise = minimum.
Macro
This controller has preset macro colours.
Press the
Macro
button (the LED will illuminate to confirm the function selection).
Adjust channel 3 - 0-100% for brightness. Adjust channel 2 for fade speed.
Adjust channel 1 for the built-in macro colours.
Blackout
When the
Blackout
button is pressed all of the LEDs will be turned off and no light will be shown.
The LED next to the blackout button will illuminate to show the function is activated. To remove the blackout
function press the Blackout button until the indicating LED is off.
Manual RGB
This allows the user to have manual control of the RGB faders and allows control of 0-100% dimmer brightness for
manual colour or manual colour mixing.
Press the manual RGB button (The LED will illuminate next to the button).
Use the three RGB faders between 0-100% to manually choose a single colour or colour mix.
DMX512 cable wiring configuration
The unit is equipped with 3 pin XLR socket for DMX output. Only use a shielded twisted pair cable designed for
three pin XLR plugs and connectors in order to connect the controller to your LED lights.
DMX ouput
DMX input
XLR socket
XLR plug
1
= shield
2
= signal (–)
3
= signal (+)
Technical specifications
Preset colours
: red, orange, yellow, green, cyan, blue, purple, magenta and white
Dimensions
: 210 x 140 x 61mm (WxHxD)
Weight
: 1Kg (not including power adapter)
Power
: 9V DC 500mA external power adapter
