13. PFL - press it to monitor a specific channel. When using sample feature use PFL to assign the channel to be
sampled
14. SYNC - press it to immediately synchronize with the BPM of the other channel.
15. KEY - press it to switch KEY mode on or off. If it is on, the unit maintains at a constant tempo and doesn’t change
while the pitch slider is moving.
16. Line fader - adjust the channel output sound level.
17. Crossfader - switch between or mix together with music of two channels.
18. Pitch fader - use it to adjust the pitch up or down to match the beat with the other channel.
19. Jog Wheel - use it to dial for slight adjusting pitch value or to scratch.
20. SHIFT key for extended menus - hold the shift key to active extended menus buttons. The text in black indicates
the buttons operation in the extended menu. Hold the shift key and the jog wheel will act as a fast search.
Hold the shift key to activate the menu below:
Audio/video mode switch
Key adjust - adjust the key of the playing track without adjusting its tempo.
Folder
1. Open or close a subfolder.
2. Under the track selection mode, it allows you to go back to select the track in the other folder.
(8,7,6) Hot Cue
1. Set three hot cues at first.
2. Then play any of these three hot cues. *SET cue button can renew the hot cue point being played at the last
time.
Sample - switch on/off sample function.
1. EFX-S: Choose a certain sample. 2. EFX1-S: Adjust the parameter 1 of VDJ sample.
Auto Loop - to shift between the beat value and press OUT button to start auto loop.
TAP - press with the beat to get a manual BPM value.
Clone A, B - copy the track of one channel to the other channel.
Smart loop this allows you to trim the length of the loop you have recorded.
Smart cue this allows you to cue on the fly without pausing the played track.
Quick Search
Headphone Output - use it to connect to a 3.5mm plug of a headphone. Front right of unit.
USB Connector - use it to connect with a laptop or a desktop via USB cable.
Video control
Please switch to video mode first to access the following features.
1. Load A, B - load a video file to either channel.
2. Transition - to choose and control the video cross fading effect
3. Effect - to transform the video into a different visual effect.
4. CTRL - the parameter is only for the effect, Boom Auto in LE version.
