Operating instructions
Basic Operation
1. Place a record on the
slip mat
(4) which sits on the
platter
(2).
2. Select the desired speed by depressing the 33 or 45 speed selector (16) button.
3. Turn the
power
(13) switch to the “
ON
” position, at which point the
target light
(14) will light up,
target lights
(14) are an optional accessory available at your local retailer.
4. Remove the stylus protector (if applicable to your cartridge).
5. Release the
arm clamp
(10) found on the
arm rest
(11).
6. Push the
start/stop
(15) button. The turntable
platter
(2) will start to spin.
7. Carefully position the
tone arm
(7) over the desired position over the record. Lower the
tone arm
(7) slowly,
while letting go of the
tone arm
(7) over the record where you want to play.
8. When play is over, raise the
tone arm
(7), move it onto the
arm rest
(11), and secure it with the
arm clamp
(10).
9. You now have the option of turning off the power by turning the
Power
(13) switch to the “
OFF
” position, or
stopping the
platter
(2) by pushing the
start/stop
(15) button.
Interrupting play
1. Pushing the
start/stop
(15) button will cause the record to stop exactly when the
start/stop
(15) button is
pressed while playing.
2. Press the
start/stop
(15) button again to start play- back with a short delay effect.
Adjusting the pitch control
1. The turntable is equipped with a
pitch control
(17). When the pitch control is in the center position, the speed
will be 33 or 45 depending on which
speed selector
(16) button is pushed.
2. When the
pitch control
(17) is positioned off center, the pitch can vary ±10% depending on the position of the
pitch control
(17).
Содержание DDX800
Страница 3: ......
