DMX address setting
When controlling the unit (or units) with a DMX controller, each one must be set with a specific DMX address. You can choose to
set all units with the same DMX address or you can set every unit with its own DMX address. If all units are set with the same
DMX address all units will be synchronised and operate in the same way. If you set each unit with a different DMX address, they
will receive the DMX signal from their own DMX address. You will now be able to control each unit individually. The DMX address
that you set for each unit must be determined by the number of channels. This unit has different options of DMX channel modes
(3, 7 or 11). When working in 3 DMX channel mode, you should set the starting address of the first unit to 1, the second unit must
be set to 4 (1+3), the third to 7 (4+3), the fourth to 10 (7+3) and so on. When working in 7 channel mode, you should set the
starting address of the first unit to 1, the second unit must be set to 8 (1+7), the third to 15 (8+7), the fourth to 22 (15+7) and so
on. When working in 11 channel mode, you should set the starting address of the first unit to 1, the second unit must be set to 12
(1+11), the third to 23 (12+11), the fourth to 34 (23+11) and so on.
3 channel DMX mode
NB
The DMX settings in Channel 2, relate to the 6 settings in Channel 1 (AP, AF, AN, SP, SF, SN)
Channel
Value
1
0-9
Black out
10-49
APxx
50-89
AFxx
90-129
ANxx
130-169
SPxx
170-209
SFxx
210-255
SNxx
2
ANxx/SNxx
0-19
Auto Program 1
20-39
Auto Program 2
40-59
Auto Program 3
60-79
Auto Program 4
80-99
Auto Program 5
100-119
Auto Program 6
120-139
Auto Program 7
140-159
Auto Program 8
160-179
Auto Program 9
180-255
Auto Program 10
3
Speed adjust
0-255
7 channel DMX mode
Channel
Value
Function
1
0-255
Red
2
0-255
Green
3
0-255
Blue
4
0-255
White
5
0-255
Strobe
6
0-255
Motor
7
0-9
NO
10-99
Red laser
100-199
Green laser
200-255
Red and green laser
