Each Mode Operation
1. Program Table:
the first line on LCD shows “SD program show”, the second line shows the name of displayed
program, press UP or DOWN to select other programs.
2. Key seek:
the first line on LCD shows “Show file”, the second line shows the name of the present displayed ILDA
file. Press UP or DOWN to select other ILDA file.
3. Audio mode:
the first line on LCD shows “Audio show”, the second line shows Aurora Studio”. Now the laser
shows built-in program, changed according to sound activation.
4. Auto mode:
the first line on LCD shows “Auto show”, the second line shows Aurora Studio”. Now laser shows built-
in program automatically.
5. DMX mode:
the first line on LCD shows the present DMX address, press UP or DOWN to change the address.
Keep holding UP or DOWN to change quickly. Press ENTER to confirm address.
6. Slave mode:
run programs as Master laser.
7. System set:
the first line on LCD shows “system set”, the second line shows the parameter. Press UP or DOWN to
select parameter, and press ENTER for confirmation.
“Colour Mode Set” to select colour,
please not on this model the colour change menu is non-functional
“Audio Set” to set sound sensitivity, use the up down buttons to change level.
“Phasic Set” to set X/Y.
8. Folder select:
the first line on LCD shows “Folder Select”, the second line shows the folder name. Press UP or
DOWN to choose folder and press ENTER for confirmation.
The maximum size of SD card usable is 2GB.
Linking master slave
Several units may be linked master / slave without using a DMX controller.
Set the first unit (master) to the desired setting i.e sound or auto mode using the LCD menu display.
Note:
only one unit must be set as the master.
Set all other units (slave) to slave mode. Use the LCD menu and choose slave mode. Press enter to select.
Link the units together using a 3pin XLR DMX cable (not supplied).
All slave units will follow the master unit.
DMX address
Controlling units with a DMX controller. Each unit uses
12
DMX channels.
To select the desired DMX address press the menu button until DMX mode is displayed, then press the enter button
to access the DMX channel menu.
This example shows how to set the start address to 001 but use the same formula to set address at different numbers
At the top of the menu address #*** is displayed, use the up down buttons until 001 is shown and press the enter
button to confirm.
This unit now has the DMX starting address of 1.
If all units are to be controlled exactly the same set all units to address 001.
If individual control of units is required each unit must have its own starting address and must be at least 11 channels
apart , no channels must cross.
i.e set the first unit to 001 the second unit to 012 and so on each unit 11 channels apart.
now the DMX controller will control all units seperatley.
Link the units together using a 3pin XLR DMX cable (not supplied).
