Universal DMX Operation (DMX mode)
This mode allows you to use universal DMX-512 console to operate.
1. Install the units in a suitable position.
2. Use standard XLR cable to connect your units together via the XLR connector on the rear of the units. For longer
cable we suggest a terminator at the last fixture.
3. Assign a DMX address to each the unit using dipswitches.
4. Turn on all units. Use DMX console to control your units.
DMX
Instruction for DMX channels
CH1
Mode select
0~49
Sound active mode
50~99
Auto-beam mode
100~149 Auto-animation mode
150~199 Static patterns
200~255 Dynamic Patterns
CH2
Color select
0~255
0 is LASER OFF; fixed color
CH3
Pattern select 0~255
Selecting patterns
CH4
Y axis moving
0~127
Manual up to down moving
130~194 Auto up moving (under dynamic pattern)
195~255 Auto down moving (under dynamic pattern)
CH5
X axis moving
0~127
Manual left to right moving
128~194 Auto left moving (under dynamic pattern)
195~255 Auto right moving (under dynamic pattern)
CH6
X axis rolling
0~127
Manual rolling
128~255 Auto rolling (under dynamic pattern)
CH7
Y axis rolling
0~127
Manual rolling
128~255 Auto rolling (under dynamic pattern)
CH8
Rotation
0~127
Manual rotation
128~191 Auto clockwise rotation (under dynamic pattern)
192~255 Auto counter-clockwise rotation (under dynamic pattern)
CH9
Zooming
0~85
Auto zooming (+)
86~170
Auto zooming (-)
171~255 Manual zooming (+/-)
CH10 Pattern Size
0~255
0 is Moderate, 1 is smallest, 255 is biggest
CH11 Display dot
0~255
0 is display dot, 255 is best brightness
CH12 Drawing
0~127
Auto drawing mode 1 (under dynamic pattern)
128~255 Auto drawing mode 2 (under dynamic pattern)
