kaltis Prime Series, Руководство пользователя, Страница: 6 / 35

2
•
Only qualified engineers or service personnel should install the unit.
•
Install the unit on a sturdy, level floor.
•
Do not install the unit in a humid place or a place where is likely to be
splashed by water. The units should be installed in a dry, well entitled
place.
•
Do not install the unit in a flammable or volatile location.
•
Do not install the unit where acid or corrosive gases are present.
•
Do not store volatile, flammable or corrosive substances inside the unit.
•
Disconnect the power source to the unit prior to any repair or
maintenance.
•
Do not disassemble, repair, or modify the unit yourself.
•
Ensure that the unit is standing straight and is not touching other
equipment.
•
Ensure that there is good air circulation around the unit. This is essential
for proper performance of the unit. A space of 70mm should surround
the unit. .
•
Connect the unit to a power source as printed on the data plate located
on the lower right side of the unit and make sure that the unit is earthed.
•
When removing the plug from the power supply outlet, grip the power
supply plug, not the cord .
•
Do not connect the unit together with other equipment or using a
multi - socket.
•
Do not damage or break the power supply plug or cord .
•
Wear gloves when you remove frozen items from the freezer.
•
Do not defrost the inside walls with a knife or any sharp object.
Do not make holes in the cabinet walls.
•
Disconnect the power plug before moving the unit.
•
Allow the unit to stand for at least 30 minutes before turning it on for the
first time.
•
Do not tilt the unit while moving it.
•
Disconnect the power plug when the unit is not used for a long time.