Kaltenbach KPS Series, Руководство пользователя, Страница: 66 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 66 of 138
KALTENBACH
When several profiles with the same drill patterns and dimensions have to be
processed the number of pieces can be entered in this field. After the processing of
one profile the processing of the next profile can start immediately after.
•
Quantity done
Immediately after processing a profile the program will increase this field with one
automatically. When the quantity done is equal to the quantity need the program will
give a message automatically. The starting of a next cycle will not be possible any
more. The values in this field can be adjusted manually. This field is also displayed in
the order manager.
•
Direction
The profiles can be transported through the punch shear machine in several ways.
After selecting this field the profile can be turned around the longitudinal axis each
time 90 degrees C.W. or 90 degrees C.C.W. For assistance the position is shown
graphically in red. For each profile type the rule is, that only the positions can be
selected which are possible to process. A profile of the type steel flats can not be
entered standing up.
-
Click the arrow to the right of the Direction text box to display the drop-down list
-
Select one of the following directions by checking the graphical view:
1
2
3
4
•
Input y-direction
There are three input modes for the input of the y-direction positions:
-
(ABS) Absolute: For the absolute input the measuring is counted from the fixed
side of the clamping, and the value filled in from the fixed side of the
clamping.
-
(SYM) Symetrical: For the symmetrical input the rule is, that the measuring is
counted from the middle of the profile.
-
(TOP) (NOT USED) For the top input the measuring is counted from the moving
side of the clamping, but the value is filled in from the fixed side of the
clamping