Kalorik WFVC 44452, Руководство пользователя

Страница: 19 / 52

19
www.KALORIK.com
WFVC 44452 - 180330
2. Water in the
reservoir is very
dirty
3. Filter is dirty
so, clear the blockages
before using.
2. Change the water in
the reservoir to fresh
water.
3. Clean the filter. It is
recommended to
replace the filter one
time per year to
maintain maximum
performance.
Vacuum cleaner
is
over heating Filter is dirty Check the filter and clean
off any dirt.
Vacuum cleaner
is depositing dirt
on the floor after
it is stopped 1. The vacuum is not
completely charged,
reducing suction
2. The floor brush is
obstructed and is not
able to rotate freely
3. The size of the
particles being picked
up may be too large
4. Other reasons 1. Completely charge the
vacuum before use,
2. Clean the floor brush
before use to maximize its
efficiency. For use on
carpets, make sure to use
the ‘Power’ setting rather
than ‘Eco’ speed setting.
3. Make use of the ‘Power’
setting rather than the ‘Eco’
setting to increase suction.
4. When vacuuming is
complete, let the vacuum
run over a clean section for
10 seconds to allow all the
dirt to be completely pulled
up from the brush and the
hose into the water
reservoir.
The air coming
out of
the vacuum
cleaner
smells 1. Filter is dirty
2. Filter is not dry
1. Check the filter and
clean off any dirt.
2. Make sure the filter has
been left to dry
completely before
inserting it back into the
handheld unit.