Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
Print only
what is inside the frame.
7
USK CM 33826 / 34128 - 110127
Back cover page
Assembly page 7/12
Fax +32 2 359 95 50
PROGRAMMING THE COFFEE MAKER
1.
To program your coffee maker to brew fresh coffee at a
preset time, first follow steps 1 to 4 in the “PREPARATION OF
COFFEE” section.
2.
Make sure the coffee maker’s clock is set to the right time. If
not, follow the directions in the “Setting the Clock” section to
change it.
3.
Press and hold the “TIME” button. The clock will now display
12:00 with the word “TIMER” at the bottom of the display. Use
the HOUR and MINUTE buttons to set the desired brewing start
time.
4.
Press the START/STOP button once to activate the preset brew
cycle. The green AUTO light will illuminate when the brew time
is properly set.
5.
When your preset brew time is reached and the coffee maker
starts its brew cycle, the green AUTO light will go out and the
red ON light will illuminate.
6.
As with the regular brew cycle, an automatic two hour keep
warm cycle will start after your coffee maker has finished
brewing. At the end of the two hours, the coffee maker will
automatically shut itself off.
AUTO SHUT-OFF
Your Coffee Maker is designed with your convenience and safety in
mind. Two hours after the completion of the brew cycle, it will shut
itself off automatically.
