Kalorik RVC 47730 BK, Руководство пользователя

Страница: 14 / 36

14
www.KALORIK.com RVC 47730 BK - 200605
Cleaning the Side Brushes
For optimal performance, cleaning the side brushes is recommended
approximately after a month of regular use. Follow the instructions below to
clean the side brushes.
• Remove the side brushes from the vacuum.
• Carefully remove any debris wrapped between the main unit and the
side brushes.
• Use a cloth dampened with warm water to remove any dust from the
brushes or to gently reshape them.
TROUBLESHOOTING
Status LED Solution
The robot vacuum is on
standby mode or
working normally.
Permanently blue N/A
The robot vacuum is on
the base and the
battery is charged
Permanently blue N/A
Cleaning paused Flashing blue N/A
The robot vacuum is on
the base and charging Flashing blue N/A
Ion function is on Permanently purple N/A
The robot vacuum is in
standby mode Light off N/A
Floor sensor error Red light is permanently
on while the robot
vacuum beeps once One of the floor sensors
has been disrupted.
Check to see if the
robot vacuum is on an
abnormal surface and
reposition.
Side brush error Red light flashes while
the robot vacuum beeps
once Check to see if the side
brushes are obstructed.
Fan motor error Red light permanently
on while the robot
vacuum beeps twice Check to see if there is
any obstruction to the
air suction.
Abnormal collision Permanently red while
the robot vacuum beeps
3 times Check the front
bumper for any
obstructions