Kalorik FT 44466, Руководство пользователя

Страница: 19 / 72

19
www.KALORIK.com
FT 44466 - 180330
‒
Do not attempt to attach the magnetic plug permanently to
the appliance.
• Ensure the oil container is in place, then turn the oil filtration control
knob to
FILTER OIL position to empty the oil reservoir (see Oil
filtration).
• Place the basket on a clean, flat and heat resistant surface.
Danger of burns!
‒
Ensure the basket cooled down completely before touching its
surface and attempting to remove the basket handle.
‒
Ensure the oil cooled down completely before emptying the oil
reservoir into the oil container.
•
Remove the basket handle from the basket.
• Remove the control panel assembly from the oil reservoir. Carefully
clean the control panel assembly and immersion heater
with a
damp cloth.
• Pull the oil filter cover from the oil reservoir and then remove the oil
reservoir from the housing.
• Open the lid filter cover and remove both black and white filters.
• Clean the appliance housing with a damp cloth.
• Wash the lid, basket, basket handle, oil reservoir and oil filter cover
with hot soapy water or in a dishwasher. Rinse and dry carefully.
• Dry all parts thoroughly after cleaning and before using the
appliance again.
NOTE:
‒
If the oil container needs to be cleaned, ensure it is empty
before attempting to clean (see Emptying the oil container).
Wash with hot soapy water or in a dishwasher. Rinse and dry
carefully.
‒
Clean the filters every 3 months or after every 12 uses with hot
soapy water. Do not clean in a dishwasher.
‒
Dry all parts and surfaces thoroughly before use. Make sure that
all parts and surfaces are completely dry before connecting the
appliance to a wall outlet. Even a small amount of water can
cause severe splattering of hot oil.
CLEANING THE FILTRATION SYSTEM: