Page 10 of 15
→
Step 9: Put the platform back in the
printer and push it into the magnetic
retaining mechanism
Note: The retaining mechanism must
be parallel to the platform handle when
correctly locked into position
→
Step 10: Ensure that the tank retaining
clamps are closed.
Note: If the clamps are not closed,
high pulling forces can cause the tank to
be lifted
→
Step 11: Place the filter casing
provided into the grille opening on the
back left of the tank
NOTE
Only make use of the refill system if you
will be using the printer on a daily basis.
Any resin remaining in the tank will
degrade more quickly if exposed to
oxygen and light. We recommend putting
leftover resin back into the bottle or -
