Before You Begin (cont.)
NOTICE:
Use only 1/2
″
(5/8
″
OD) copper pipe (type L or M)
between the valve and bath spout. Using other materials may cause
back pressure and result in water flowing from the showerhead and
bath spout at the same time.
NOTICE:
Some installations require valve trim roughing-in
dimensions different from those shown in this guide. Refer to the
valve trim specification sheet to confirm dimensions.
NOTICE:
Do not force the handle in any direction. Forcing the
handle will damage the valve.
Observe all local plumbing and building codes.
Shut off the main water supply.
Kallista reserves the right to make revisions in the design of
faucets without notice, as specified in the Price Book.
089585-2-BE
4
Kallista
