Questions? Problems? For additional assistance, please contact Kallista's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
1072018-2-B
Page 3 of 3
P23080
One™ Wall Mount Pot Filler
INSTALLATION INSTRUCTIONS
2. INSTALL THE FAUCET ASSEMBLY (cont.)
3. INSTALLATION CHECKOUT
4. EVERYDAY USE
Aerator Assembly
Slide the escutcheon on to the faucet shank.
NOTE: Use a strap wrench to tighten the faucet connection. Do not tighten using the spout.
Thread the faucet on to the supply. Use a strap wrench to tighten until a water tight seal is made and the
faucet is positioned as shown.
Verify that the groove in the under side of the faucet shank is aligned with the set screw hole in the mount-
ing plate. Secure with the set screw.
Slide the escutcheon over the mounting plate.
Position the escutcheon so the set screw hole is facing down.
Secure the escutcheon with the small set screw.
Turn both the handles full clockwise to the off position to close the valves.
Verify that all connections are tight.
Twist the aerator counterclockwise to remove it from the spout.
Position a bucket, or other suitable container, beneath the spout.
Turn on the main water supply.
Check all the connections for leaks; repair as needed.
Open both faucet valves to run water through the faucet.
Check all connections for leaks; make any adjustments as needed.
Allow water to run through the spout to remove any debris.
Turn off the faucet by closing both the valves.
Remove any debris from the aerator and reinstall.
IMPORTANT! The handle closest to the wall must remain in the off position when not in use.
