background image

Prior to installation, unpack the mirror and inspect it for damage.  If product is damaged, contact Kallista's Customer 

Service (below) immediately.

1048645-2-B

Page 1 of 2

Questions?   Problems?   For additional assistance, please contact Kallista's Customer

Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.

INSTALLATION INSTRUCTIONS

P74204

1048645-2-B

Page 2 of 2

Questions?   Problems?   For additional assistance, please contact Kallista's Customer

Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.

INSTALLATION INSTRUCTIONS

          Description

Model

P74204

Laura Kirar Vir Stil

 Mirror

Laura Kirar Vir Stil

 Mirror

INSTALL THE MIRROR

BEFORE YOU BEGIN

THANK YOU FOR CHOOSING KALLISTA

TOOLS AND MATERIALS

We appreciate your commitment to Kallista quality accessories.  Please take a moment to review this manual before 

you install your Kallista accessory.  If you encounter any installation or performance problems, please don't hesitate 

to contact us at the phone number listed at the bottom of the page.

Screwdriver(s)

Level

Pencil

Measuring

Tape

Drill

Safety

Glasses

Mounting

Anchors

Multi-purpose

Screws

Position mirror at desired height from floor.  Using a pencil, scribe a 

line along the top of mirror.  This will become Reference Line "A" 

(Figure A).

Remove mirror.  Scribe a second line (Reference Line "B") 3 1/4" 

below Line "A" (Figure B).  Use a leveling tool to insure that the line is 

horizontal.  

While holding the cleat with the larger side facing AWAY from wall, 

align the left hole in the cleat with Line "B".  Once left hole is secure 

(Step 4), you may proceed to the additional holes. 

Securing the cleat to the wall may be accomplished by two methods:

●  Installer may utilize the pre-drilled holes in the cleat.  If the holes 

align with the wall studs, the cleat may be secured using 

multi-purpose screws (not included).  It will be necessary to use 

mounting anchors (not included) if the pre-drilled holes do not 

align with the wall studs (Figure C).

●  If the locations of the wall studs are predetermined, the installer 

may drill pilot holes in the cleat to align with those wall studs.  The 

cleat may then be secured to the wall studs using multi-purpose 

screws (Figure D).  

Lower the mirror onto the cleat.  Ensure that the mirror is totally 

engaged before releasing your grip.  

THIS DIRECTION

TOWARD WALL

3 1/4"

Reference Line "A"

Reference Line "B" 

Mounting

Cleat

Figure B

Mounting

Cleat

Mounting

Cleat

Figure C

Figure D

Multi-purpose

Screws

Desired height 

from floor 

Reference Line "A"

Figure A

Отзывы: