Kalley K-LED32HDZT2, Руководство по обслуживанию

Страница: 9 / 42

- 9 -
problems resulting from scratches on the parts, the deformation of parts, and
short-circuits due to residual electric charge.
• Routing of the wires and fixing them in position must be done in accordance with the
original routing and fixing configuration when servicing is completed. All the wires
are routed far away from the areas that become hot (such as the heat sink). These wires
are fixed in position with the wire clamps so that the wires do not move, thereby
ensuring that they are not damaged and their materials do not deteriorate over long
periods of time. Therefore, route the cables and fix the cables to the original position
and states using the wire clamps.
• Perform a safety check when servicing is completed. Verify that the peripherals of
the serviced points have not undergone any deterioration during servicing. Also verify
that the screws, parts and cables removed for servicing purposes have all been
returned to their proper locations in accordance with the original setup.
The lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the set.