Kalley K-LED32HDST2, Руководство по обслуживанию

Страница: 20 / 35

or renamed.
¾
Plug USB stick to the TV USB slot.
¾
Press RCU
MENU
Æ
Option
Æ
Software upgrade
Æ
By USB
Æ
Confirm.
Or, turn off the TV press and hold the power key of key board before reconnect AC
cord to restart TV for 5-8seconds (Forced Upgrade).
¾
When the "UPGRADING SOFTWARE" picture appears as below, it means TV is
uploading SW BIN image. Waiting a few minutes.
¾
When updating is successful, TV should restart automatically.
There are two methods to upgrade SW using USB, the first one like below
：
In the previous of upgrade SW using USB, should program mboot bin file
”
MS08GP_MBOOT.bin”
by ISP_Tool or by USB. .
¾
Then switch off TV by removing AC cord.
¾
Copy the SW BIN image
“MS08GP_MAIN.bin” for MS08GP
into USB stick (pen
drive) root path
Note: If there’s already other
“
The same name
”
into USB root, it needs to be deleted or renamed
¾
Plug USB stick to the TV
¾
Press and hold the power key of key board before reconnect AC cord to restart
TV for 5-8seconds.
¾
Once USB stick starts blinking, TV is uploading SW BIN image.
¾
When update is successful, TV should restart automatically.
¾
Remember to perform “
Factory menu
Æ
NVM reset
“ and then press RCU “
OK
”
key
¾
Switch off TV by removing AC cord
¾
Reconnect AC cord to restart TV and wait few seconds for Eeprom update
The second method
：
¾
To use this method, there should be SW in mainboard to ensure TV can display
normally.
¾
Copy the SW BIN image
“MS08GP_MAIN.bin”
and into USB stick (pen drive)
root path
¾
Press RCU
MENU
Æ
Option
Æ
Software upgrade
Æ
By USB
Æ
Confirm
¾
TV display warning information, that means it is upgrading, almost 3minutes later,
when upgrade successful, TV should restart automatically.