Kalley K-LED24HDT2, Руководство по обслуживанию

Страница: 10 / 35

OFF：The set would enter standby mode
after 15 minutes without input
2-WARM UP OFF
signal；
OK
ON ： Aging mode. Aging time will
display on the left bottom of screen.
3-ADC ADC calibration（refer as follow） OK
4-WHITE BALANCE White Balance data adjustment（refer OK
as follow）
The balance data is set by PE before
the mass production. Do not need
adjust.
5-SHOP DO Reset the set after production OK
alignment;(This operation will
remove all unnecessary factory value;
The factory hotkey will be turn off)
6-NVM reset DO System initialization. Restore all OK
data except the White Balance and ADC
data ;Only for R&D.
7-SET FAC CH DO Preset specific factory channels for OK
specific factory. Press left and
right button to select the factory,
and then press OK to confirm.
8-POWER ON LAST ON: Always turns on TV when AC power OK
on
STB：Always goes to standby mode when
AC power on
LAST：Restore the status before the
last AC power off
9-USB UPDATE USB update，（refer as follow） OK
10 This item only factory used，
ReloadEFBItem…
Note: Below the factory menu, some model information are showed, including
software version, Project Name, SIACP Version, and SW release time.
ADC Submenu:
ITEMS Default Description Status
Setting