KALI AUDIO SM-5-C Скачать руководство пользователя страница 8

Страница: 8 / 18

Kali Audio SM-5-C Users’ Guide

Example Signal Chains

1. Source -> Signal processing -> Conversion -> Amplifier -> Loudspeakers. (Recommended.)

The computer outputs to an Avid® MTRX Studio, which handles room calibration. The MTRX studio

outputs balanaced audio to the LEA® amplfier. The LEA® amplifier processes speaker tuning and

outputs to the speakers.

2. signal processing in computer -> Dante

-> Amplifier -> Loudspeakers.

The computer handles room calibration in software with a program like Sonarworks® SoundID. The

computer uses Dante Virtual Soundcard® as the output to a Dante®-capable LEA® amplifier. The

LEA® amplifier processes speaker tuning and outputs to the speakers.

3. signal proc loudspeaker processing in computer -> Conversion -> Amplifier ->

Loudspeakers.

The computer handles room calibration in software with a program like Sonarworks® SoundID. The

computer also handles loudspeaker tuning with a separate EQ processing program. The computer

outputs to an I/O device like an Apogee® Symphony I/O. The amplifier only processes voltage limiting

functions and outputs to the speakers.

Содержание SM-5-C


















