Kalfire W Series, Инструкция по установке и эксплуатации, Страница: 37 / 68

Tips
•
Use enough wood to ignite the Kalfire:
- Kalfire W45/48F ca. 2 kg
- Kalfire W70/33F ca. 3 kg
- Kalfire W60/51F, W85/40F, W65/38C,
W66/48S, W90/47C, W90/47S ca. 4 kg
- Kalfire W71/62F, W100/61F, W105/47F,
W80/52T en W105/47T ca. 6 kg
•
When the fire has been lit, leave the door slightly open (1-2
cm) for a few minutes; the wood will catch fire more easily
and the flue will be quickly warmed-up.
Do not use white spirits, petrol, oil or other liquid fuels.
Be aware that weather conditions (air pressure, temperature,
wind) can influence combustion. Minimize these influences by
adjusting the secondary air supply.
5.6 Optimal heat output
For optimal heat production we advise you to burn wood
according to the instructions below. This will achieve the same
performance and emission values, obtained during inspection of
the appliances.
•
Ensure a glowing bed is created (see section 5.5).
•
Use logs of wood of approximately the same size. The
amount differs per Kalfire W model. See table below.
Table 6 Instructions for optimal burning per model
* Weight for beech wood.
Kalfire model W45/48F W60/51F W65/38C W66/48S W70/33F W71/62F W80/52T
Weight* per log (g) 850 850 950 975 800 1100 850
Number of logs 2 3 3 3 3 3 4
Max. weight* wood per hour (kg) 2.3 3.6 4 3.5 2.9 5 4.5
Air regulation open (%)
100 50 30 25 75 33 90
Kalfire model W85/40F W90/47C W90/47S W100/61F W105/47F W105/47T W120/38F
Weight* per log (g) 1000 850 1400 1200 1280 1100 1300
Number of logs 3 4 3 3 3 4 3
Max. weight* wood per hour (kg) 4 4 5.5 3.6 4.6 5 5.2
Air regulation open (%) 50 10 50 60 33 50 100
37