Kalfire Gi75/59F, Руководство по установке

Страница: 24 / 60

24
6.3 KalSense ring
The patented KalSense ring located directly
behind the glass at the front of the fireplace
provides instant feedback on operating actions.
Figure 25: KalSense ring
The ring indicates the status of the fireplace by
colour, division and/or flashing. For example, if
the EmberGlow function is activated with the
remote control or via the app, the ring briefly
lights up orange and then goes out again.
The 9 sections (LED lights) into which the ring is
divided indicate the level of a particular function.
The example below shows the fireplace's
"increase flame height" function, which consists
of 5 levels. The higher the level, the more LEDs in
the KalSense ring light up brightly. In the
KalfireConnected app, the KalSense ring is also
displayed on the screen. This corresponds to the
KalSense ring in the fireplace.
6.4 Remote control and symbols
1. Fireplace on/off
2. function
3. Manual control
4. Thermostat function
5. Increase flame height
6. Reduce flame height
7. Comfort function
8. EmberGlow
9. Natural Spark Generator
10. Moods 1
11. Moods 2
12. Moods 3
CAREFUL!
Change in the flame pattern after selecting a
certain function almost always occurs with
some delay. Depending on the function
selected, this delay may be longer or shorter.
The fireplace needs some time to measure the
temperature (in some cases), calculate the
correct setpoints and control the three gas
valves.