Kalerm KLM1601, Руководство по обслуживанию

Страница: 17 / 96

Troubleshooting
15
3. Troubleshooting check list
3.1
3.2
3.1.1
3.2.1.1
3.2.1.2
3.2.1.3
3.2.2.1
3.2.2.2
3.2.2.3
3.1.2
3.2.1
3.2.2
3.2.3
3.1 Troubleshooting check list
Item Confirmation No. No. Cause Remedy Remarks Problem
Prob-
ability
The following should be repaired by disassembling the machine
The following should be repaired by disassembling the machine
Examine
external
damage
of coffee
machine
Examine
the
external
moving
parts
External
parts are
broken or
damaged
Much coffee
powder left on
the base
Brew unit doesnot
reset
Drip tray group
components
damaged
Export blocked
the drip tray
Coffee grounds
blocked the brew
unit
Sliding panel of
the export is
damaged
Brew unit does not
reset, abnormal
power off
Power cord
damaged
Drip tray
can not be
installed in
place
Drip tray
can not be
taken out
Coffee
export fall
off
YES - If necessary - replace the
external parts
NO - continue to 3.1.2
YES - replace powder cord
YES - take out the drip tray,
observe if there are lots of coffee
powder on the base, clean the
rest coffee powder
NO - continue to 3.2.1.2
YES - 1. Take away the coffee
ground container 2. Insert the
drip tray into the coffee machine
3. Press ON/OFF 4. Take out the
drip tray after the coffee
machine reset and the screen
appears ""HEATING"" 5. Put the
coffee groud container on the
drip tray and insert them into the
coffee machine again
NO - continue to 3.2.1.3
YES - replace the components
YES - move the export up
NO - continue to 3.2.2.2
YES - take the drip tray out when
the machine in READY state
NO - continue to 3.2.2.3
YES - 1. Power on and power off
for more than 2 times. 2. If tray
can not be take out disassemble
and clean the coffee grounds
inside the brew unit
Replace the sliding panel of the
coffee export, item: 79000051
Disassemble the
external parts
according to 4.2.1
Disassemble the powder
cord according to 4.2.2
Replace or repair the
damaged components
according to the drip
tray explosive view
8810101017
Restart more times if
once is not enough
Disassemble the brew
unit group and clean
the coffee grounds
according to 4.3.3
1. Disassemble control
panel according to 4.2.8
2. Disassemble control
panel components
according to 4.3.4
3. Replace or repair the
damaged components
according to the
control and explosive
view