Kaleidescape Part No. 101-0105-00 Rev 5
Page 35
Kaleidescape Premiere Line Installation Guide
Physical Installation
b.
3U Server
- Unpack disk cartridges and blanks. Save packaging.
Pull down the front panel.
Install disk cartridges, then blanks. Insert the first disk cartridge
into the first storage slot and push the disk cartridge in until it
clicks into place. Staggering blank cartridges in storage slots
between disk cartridges provides optimal cooling. Refer to
Removing and Adding Disk Cartridges or Blanks on page 59
for a
detailed procedure.
Press firmly, then press once more to be sure disk cartridges are
completely seated.
Close the front panel.
Premiere Line Players
Use the following procedure to rack mount Players in the Premiere line.
M500 Player
Note:
The M500 Player can also be installed on a tabletop. See
Installation for the M500 Player on page 49
1. Rack mount the player.
a. Tug gently on both sides of the front panel until panel comes off. Set
the panel aside.
1
14