LDM 500-80
+
ENGLISH
© KALEAS GmbH & Co. KG
29
You can sequentially set the following units:
Length
Surface area
Volume
0.000 m
0.000 m²
0.000 m³
0.00 m
0.00 m²
0.00 m³
0.00 ft
0.00 ft²
0.00 ft³
0.001/16 ftin
0.00 ft²
0.00 ft³
0' 0" 1/16
0.00 ft²
0.00 ft³
0.0 in
0.00 ft²
0.00 ft³
0 1/16 in
0.00 ft²
0.00 ft³
Selecting the reference surface
1x
short
Switching the reference surface
top reference surface [C] – bottom reference surface
[H] – angle stop [G]
Display [7]
This reference surface must be set manually prior to measuring
since otherwise the result of the measurement will deviate from the
actual value by the length of the Distance Meter and / or the stop
angle.
Top reference surface
The Distance Meter measures from the top surface, such as from an
edge.
Bottom reference surface and angle stop at 90º
The Distance Meter measures from the bottom surface, such as
from a surface area.
Use this reference also when the angle stop [G] is flipped out 90º in
order to use an outside corner as a stop.
