E.g:
The first one is set to 10, and the set value, S-10, can be selected by pressing UP or DOWN.
The second setting is IP01, you can press the up arrow or down arrow to select the set value,
The third setting for the remote control switch settings, SW-1 is to open the remote control, SW-0 is off the
remote control. SW-1 can be turned on by pressing UP or DOWN.
After setting the above three, the digital control back to A001 can.
2
，
Remote Setting
A: Button 1 is the switch remote control. Press once to open the digital tube display PX-X. Press once to turn
off. Display A001. (The first X can display 0-9 any number or A, b, c letters, the second X shows 0 \ 1 \ 2 \ 3.
What is displayed depends on what function was used before the last shutdown)
B, the button 2 is red control, each time you press the 2 key, digital display will change between P2-0, P2-1,
P2-2, P2-3. P2-0 is not bright, P2-1, P2-2, P2-3 means the red brightness changes from small to big.
C, button 3 is the green control, each time you press the 3 key, the digital display will change between
P3-0, P3-1, P3-2, P3-3. P3-0 said not bright, P3-1, P3-2, P3-3 said the green brightness from small to large.
D, button 4 is the blue control, each time you press the 4 key, digital display will change between P4-0,
P4-1, P4-2, P4-3. P4-0 said not bright, P4-1, P4-2, P4-3 said the blue brightness from small to large.
F, button 5 is a white control, each time you press the 5 key, digital display will change between P5-0, P4-1,
P4-2, P4-3. P5-0 is not bright, P5-1, P5-2, P5-3 white brightness from small to large
G, button 6 is a color gradient, each press the 6 key, digital display will change between P6-0, P6-1, P6-2,
P6-3. P6-0, P6-1, P6-2, P6-3 means that the gradual change from slow to fast
H, button 7 is the color pulse, each time you press the 7 key, digital tube display will change between P7-0,
P7-1, P7-2, P7-3. P7-0, P7-1, P7-2, P7-3 means slow to fast pulse.
I, the button 8 is the color jump, each time you press the 8 key, digital display will change between P8-0,
P8-1, P8-2, P8-3. P8-0, P8-1, P8-2, P8-3 means the transition from slow to fast.
J, button 9 is the color Happy Valley, each time you press the 9 key, digital display will change between
P8-0, P8-1, P8-2, P8-3. P8-0, P8-1, P8-2, P8-3 means that the race horse is slow to fast. (Multiple connection
effect, you need to set a different wireless receiver ID address)
K, button 10 is the color combination horse race, each time you press the 10 key, digital display will change
between PA-0, PA-1, PA-2, PA-3. PA-0, PA-1, PA-2, PA-3 means the combination horse race is from slow to
fast. (Multiple connection effect, you need to set a different wireless receiver ID address)
L, button 11 is the water effect, each time you press the 11 key, the digital display will change between
PB-0, PB-1, PB-2 and PB-3. PB-0, PB-1, PB-2, PB-3 said the effect of water from slow to fast. (Multiple
connection effect, you need to set a different wireless receiver ID address)
M, key 12 is the brush, each time you press the 10 key, the digital display will change between PC-0, PC-1,
PC-2, PC-3. PC-0, PC-1, PC-2, PC-3 means that the brush from slow to fast. (Multiple connection effect, you
need to set a different wireless receiver ID address)
Ⅵ
. Master and slave settings
2 or more sets of the same lamps and lanterns with 3-core signal cable connected to set any
host set to voice or gradient, pulse, transition, other lamps in the A001 or d001 mode, then enter
the master-slave mode and from Machine display does not blink (flashing means the machine did
not receive the signal, to check the cable)
Special attention: a group of lamps can only set up a host, if there is more than one host, all
the lights will chaos flash step by step
。
ID01
ID99
Wireless remote control ID address, press the UP button / DOWN button to select
the ID address (ID01-ID99), press the ENTER button to save.
SW-0
SW-1 Press UP / DOWN to select Remote Control ON (SW-1 ON) and press ENTER to save.
