Kaldewei AQUAMASSAGE BODY, Руководство по эксплуатации

Страница: 7 / 140

299.283 / 12.2021 | © KALDEWEI | 07/140
EN
1.1 General instructions:
The movement of the water facilitates the heat absorption or
dissipation of the body. These changes in body temperature lead
to a stimulation of the circulatory system (stress on the
cardiovascular system).
In the case of diseases of the central or peripheral circulatory
system, the attending doctor should always be consulted.
In general, however, a water temperature similar to body
temperature is preferable.
A massage effect is created by the water jet from the massage
nozzles. Medical advice should be sought in the case of diseases
of the leg veins. In general, a low massage setting and a cool
water temperature is preferable.
When getting out of a bathtub (wellness tub), dizziness may occur,
which affects balance and perception. This can result in falls.
If you have a tendency to feel dizzy, you should avoid getting up
suddenly, select water that is cool or at room temperature,
shower your legs with cold water starting from the feet towards
the head and make sure you use suitable bath additives.
Ask your specialist dealer for information about access or other
bathing aids.
If in doubt or if you have any concerns, you should always consult
your doctor before having a wellness bath.
Technical changes reserved. For current status, see www.kaldewei.com
Contents
1.0 Instructions:
1.1 General instructions ................................................ 07
1.2 Safety instructions ................................................. 08
1.3 Cleaning instructions ............................................ 09
1.4 System description ............................................... 106
2.0 Operation:
2.1 Fill with water ....................................................... 108
2.2 Side nozzles Body ................................................. 110
2.3 Floor nozzles Silent mode ...................................... 112
2.4 Side nozzles Standard mode .................................. 114
2.5 Floor nozzles Silent mode ...................................... 116
2.6 Floor nozzles Standard mode ................................. 118
2.7 Spectral light ........................................................ 120
2.8 Blow drying ........................................................... 121
3.0 Cleaning:
3.1 Cleaning of tub ..................................................... 122
3.2 Disinfection of the WHIRL system .......................... 124
3.3 Cleaning the waste ............................................... 126
4.0 Maintenance:
4.1 System reboot ...................................................... 134
4.2 Troubleshooting.................................................... 136