6
When you use the cooler for the first time or restart the cooler after having been shut off for a
long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the cooler is running for a few hours everything will be back to normal.
IV. ELECTRIC DIAGRAM
V. I
NSTRUCTION
Note:
Position your Cooler so that the plug is accessible.
Keep your Cooler out of direct sunlight.
Do not place next to heat generating appliance.
Place the Cooler on a leveled surface that is strong enough to support the unit when it is
fully loaded. To level your Cooler, adjust the front feet located at the bottom of the unit.
Important:
Before connecting the unit to a power source, allow it stand upright for approximately 3
hours. This will reduce the possibility of any system malfunctions which may have occurred
from handing during transportation.
When positioning the Cooler, 6 inches of space at the back and 10 inches of space both
sides are suggested. Do not put any objects on top of the unit which may block the air
circulation.
Power Connection:
