8
VI. VENTILATION
•
Do not install the Cooler in a closed cabinet without proper ventilation.
•
Please leave at least 5cm distance between the wall and the Cooler.
•
Do not remove the feet of the Cooler. Keep at least 50mm of ground clearance.
VII. CLEANING
•
UNPLUG the Appliance, and remove all items including shelves.
•
Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2
table spoons of baking soda to a quart of water.
•
Wash the shelves with a mild detergent solution.
•
Wash the outside cabinet with warm water and mild detergent. Rinse well and wipe dry with a clean soft
cloth.
VIII. TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSES
Appliance does not operate
•The unit may be plugged in using a different voltage.
•The circuit breaker may be tripped or there is a blown fuse.
The Cooler is not cold enough.
•Check the temperature control settings, as the external
environment may be too hot.
•The door may be opened too frequently.
•The door is not closed completely.
•The door seal does not seal properly.
•The Cooler does not have sufficient clearance.
The Cooler vibrates while operating.
• Check to assure that the appliance is level.
The Cooler seems to make too much noise.•The unit may not be leveled.
• Check the fan.
