Kalamazoo 450 Series K450GB, Руководство пользователя

Страница: 8 / 43

Kalamazoo Outdoor Gourmet
™
1.800.868.1699 www.KalamazooGourmet.com
7
CONNECTING THE LP TANK / LEAK TESTING
WARNING: Make sure that the LP tank valve is closed by turning it clockwise.
DANGER: Do not use an open flame to check for gas leaks. Be sure there are no
sparks or open flames in the area while you check for leaks. This will result in a fire or
explosion, which can cause serious bodily injury or death and damage to property.
Bubble Test:
You will need an LP tank, a soap and water solution, and a rag or brush to
apply it. NOTE: Since some leak test solutions, including soap and water, may be slightly
corrosive, all connections should be rinsed with water after checking for leaks.
1.
For free-standing models, open right end door, and set the tank on bottom shelf.
Kalamazoo 450 Series Grills provide two slots to hold the tank in place. See first
diagram below. Kalamazoo 900 Series Grills provide a cutout in the floor for the tank
to rest.
2. Connect the hose to the cylinder. (Screw the regulator coupling onto the tank valve,
clockwise, or to the right. Hand-tighten only). See second diagram below.
3. Mix soap and water 50/50 .
4. Open the tank valve. Make sure grill knobs are in the “OFF” position.
5. Check for leaks by wetting the fitting with the soap and water solution and watching
for bubbles. If bubbles form or if a bubble grows, there is a leak.
1. When leak checks are complete, turn gas supply OFF and rinse connections with
water. If leak does not stop, turn off the gas and contact us at
(800) 868-1699 . Do not
use the grill.