USER MANUAL STARTER
12
TRANSLATED FROM ORIGINAL VERSION: EDITION 1
5. ADJUSTMENTS AND RECOMMENDATIONS
Use of the safety reset button :
If the emergency button has been pushed, the rollers would not start rotating. The working mode
LED indicator (Rep. C) would be red, meaning that safety is active.
To reset the safety, check the the emergency button is disengaged (Rep.D) and press on the safety
reset button (Rep.F) to start operating the machine..
By listening carefully, the user may hear a « clic », corresponding to his pressing on the reset
button.
5.6 Switching off the machine
The rollers are among the master components
of your laminator. Their regular and proper
maintenance will secure long years of use.
CAUTION :
Before
switching
the
machine off, raise the upper roller up
by a few mm so that it does not stay in
contact with the lower one. This would
avoid the creation of a flat contact line
that you may after find on your works.
.
Then turn off the machine from the power by
switching the main switch off (Rep.13).
