KAL-FIRE Heat Pure Series 65R, Инструкция по установке и эксплуатации

Страница: 30 / 72

3. Mounting and installation
27
Fireplace surround
Materials with the following characteristics can be used to create the
surround around the Heat Pure:
−
resistant to high temperatures, minimum 700 °C.
−
free from materials which can cause fumes and odour nuisance.
−
dimensionally stable, even after lengthy exposure to high
temperatures.
1. The surround must have no direct connection to the Heat
Pure; it must be self supporting.
2. Seal the joints between the Heat Pure and the surround, using
heat resistant glass fibre or ceramic cord.
3. Use the Kal-fire mantel iron for easy and stable mounting of
the span above the door of the Heat Pure. Never attach this
mantel iron to the actual Heat Pure, but to the side of the
surround or use tie rods to attach it to the ceiling or wall.
4. Ensure that the thickness of the surround above the door of
the Heat Pure does not exceed 11 cm, otherwise the Heat
Pure will be too deeply recessed and it will be difficult to
operate/clean the door.
5. Finish the surround using materials that do not contain any
plastic substances. High temperatures may cause plastic to
discolour.
6. Before completely closing off the surround, ensure that the
inside of the surround is clean and free of dust. Preferably use
a vacuum cleaner to clean the inside of the surround. If you
fail to do his, particles of dust may cause problems in the air
flow of the convection system.
7. The Heat Pure is surrounded by a metal strip which facilitates
the join between the surround and the Heat Pure. These metal
strips can be hidden from view on the front; all the lines of
the surround then merge into the finishing strips. The side
strips can be demounted inwards, so the guide can be
accessed in the event of maintenance.