KAKA Industrial W01-5116, Инструкция по сборке и эксплуатации, Страница: 5 / 9

Forming Rings
The half-round slots on the right side of Shaft 2 (#20) and Shaft 3 (#7) can be
used to form rings of various dimensions.
1. Insert the steel in half-round slot of Shaft 2 (#20) or Shaft 3 (#7).
2. Rotate the Handle (#23) to form the metal ring.
WARNING: Keep the hands away from the shafts and metal
plate during operation. Do not attempt to form rolls from
materials other than those specified.
PARTS LIST
Part # Description Qty
1 Left Stand 1
2 Nut M12 1
3 Hex Bolt 1
4 Support Bushing 4
5 Square Bushing 1
6 Flat Key 3
7 Shaft 3 1
8 Shaft 1 1
9 Right Stand 1
10 Sleeve 1
11 Washer 1
12 Spring Washer 1
13 Screw 1
14 Cover 1
15 Hex Bolt 4
16 Spring Washer 4
17 Washer 4
18 Bearing 1
19 Small Gear 2
20 Shaft 2 1
21 Base 1
22 Adjusting Bolt 2
23 Handle 1
24 Locking Screw 1
25 Hex Nut 1
26 Handle Bushing 1