KAKA Industrial F1.2X710, Руководство по сборке и эксплуатации

Страница: 4 / 6

- 4 -
5. The shaft 16# are put into the upper frame 1 # from the upper hole and then fixed by
guilding bolt 31# and nuts 32# to make the shaft 16# can not be rotary but can
sliding up and down. Inserted adjustable threaded shaft 17 # to the upper frame 1#
from the lower hole and connected with the flat key 19# and handle seat , then fixed
by washer 20# and bolt 21#. The top of 16# is connected with adjustable support
stand13# and locked tensely with bolt 14#.
6. The end of adjustable handle 18# with marking device is inserted into handle
seat .You can turn the handle to adjust the distance between lower wheel 13# and
threaded shaft17#.
7. The hanger 36# is fixed with upper frame through spring washer 34,flat washer 35
and bolt 33.
8. After assembling the whole machine, the work piece will be processed between upper
wheel 5# and lower wheel 13#. According to the needs of processing, you can
choose wheel 37#, 38#, 39#, 40#, 41# instead of 10#.
LUBRICATION
1. All exposed iron surfaces should be coated with light oil to prevent rusting. Use a multi-
purpose or bearing grease for lubrication.
2. The adjusting block should be greased.
3.
Oil the driving shaft through the oil ports monthly.