KAKA Industrial 176503, Руководство по эксплуатации, Страница: 3 / 10

Operation Manual AP-2
KAKA
®
Industrial
- 3 -
IMPORTANT SAFELY
PRECAUTIONS
READ ALL INSTRUCTIONS BEFORE
USING THIS TOOL.
1. KEEP WORK AREA CLEAN. Cluttered
areas invite injuries.
2.CONSIDER WORK AREA
CONDITIONS. Don’t use tool in damp,
wet, or poorly lit locations. Don’t expose
to rain. keep work area well lit.
3. KEEP CHILDREN AWAY. All children
should be kept away from the work area.
Don’t let them handle tool or extension
cords.
4. STORE IDLE EQUIPMENT. When not
in use. tool should be locked up in a dry
location to inhibit rust. If possible, store in
an area out of reach of children.
5. DON’T FORCE TILE TOOL. It will do
the job better and more safely at the rate
for which it was intended.
6. USE THE RIGHT TOOL. Don’t force a
small tool or attachment to do the work of
a larger industrial tool. Don’t use a tool for
a purpose for which it was not intended.
7. DRESS PROPERLY. Don’t wear loose
clothing or jewelry. They can be caught in
moving parts. Protective gloves and
non-skid footwear are recommended
when working. Wear protective hair
covering to contain long hair, preventing it
from getting caught in machinery.
8. USE EYE PROTECTION. Wear ISO
approved impact goggles.
9. SECURE WORK. Use clamps or a vise
to hold the work if possible. It’s safer than
using your hands and it frees both hands
to operate the tool.
10. DON’T OVERREACH. Keep proper
footing and balance always.
11. MAINTAIN TOOLS WITH CARE.
Keep tools sharp and clean for better and
safer performance. Follow instruction for
lubricating and changing accessories.
Inspect tool cords periodically and if
damaged, have them repaired by an
authorized service facility. Keep handles
dry, clean, and free from oil and grease.
12. REMOVE ADJUSTING KEYS AND
WRENCHES. Make it a habit to check
that keys and adjusting wrenches are
removed from the tool or machine work
surface before using.
13. STAY ALERT. Watch what you are
doing, use common sense. Don’t operate
any tool when you are tired.
14. CHECK DAMAGED PARTS. Before
using any tool, any part that appears
damaged should be carefully checked to