Machine elements
Technical data
Supplementary safety instructions
Intendend use
Before using for the first time
1
Grip
6
Gear selector
2
Guard handle
7
Neck of the machine
3
Ventilation slits
8
Mixing shaft with HEXAFIX coupling
4
Button for starting lockout
9
Sleeve
5
ON/OFF switch with electronics
10 Mixing tool with hexagonal shaft
Rated power/Current consumption:
Voltage:
Gears:
Rpm under load:
Recommended mixing tool Ø:
Sound pressure level acc.to EN 50144:
Noise emission level acc.to EN 50144:
Hand-arm vibration:
Protection class:
To be able to use the machine safely it is essential that you read these safety instructions thoroughly and
comply with all of them. The machine may be used only by people who are familiar with the operating
instructions and the regulations in force concerning work safety and accident prevention.
In addition, also comply with the general safety instructions also included with the machine.
Take care to ensure that the current voltage indicated on the rating plate corresponds to that of the mains power supply.
Do not use the device in any environments with potentially explosive atmospheres. Do not mix any solvents or solvent-
containing substances with a flash point of below 21° C.
Do not wind cables or leads around any parts of the body.
Use only cables approved for outdoor use. Never use the machine with a damaged cable.
Start up and run down the machine in the mixing container only. Ensure that the mixing container is stood in a firm and
secure position.
Do not reach into the mixing container with your hands or insert any other objects into it while mixing is in progress.
If the sound pressure level should exceed 85 dB (A) where you are working, use ear protection! We recommend that you
wear work gloves and protective goggles when using the mixer. Regulations require that you wear close-fitting
clothing.
Dust developing during the mixing prodedure is harmful to one’s health. Wear a dust protection mask.
The machine is designed for mixing liquid and powder-based building products such as paints, mortar, adhesives, plaster
and similar substances in the construction business. Use the right mixing tool for the consistency of the material and
the quantity to be mixed. Please refer to the information in the technical data when choosing the size of mixing tool
(diameter).
This machine may not be used for the mixing of food stuffs.
The machine is not suitable for mixing of materials containing graphite powder, hydrochloric solutions or liquid manure.
Mixing such materials can damage or destroy the machine.
Insert the mixing tool with the HEXAFIX mount in the coupling until it locks. To release the mixing tool, simply pull back
the handle-collar on the coupling and this releases the mixing tool.
Connect the machine to the 230 volt mains power supply. 230 volt devices can also be used with a 220 volt supply.
G
B
C
X
1
0
0
H
F
C
X
2
0
0
H
F
C
X
4
0
0
H
F
C
X
6
0
0
H
F
1100 W/4,8A
230 V
1
250 -700 min
-1
Ø 120 mm
84 dB(A)
97 dB(A)
< 2,5m/s2
/II
CX-HF_17sprachig_0208.indd 6
29.05.2008 15:12:52
29.10.2008
