Kaito
®
KA-346 AM|FM|WB Radio & MP3 Player
Kaito
®
KA-346 AM|FM|WB Radio & MP3 Player
User’s Manual
User’s Manual
WARNING!
Please read the instructions before first use of the radio.
Please unplug the radio from charger after 1 ~ 2 hours charing, do not charge it for more than 2 hours.
In order to prevent the risk of fire or electric shock, do not expose the radio to rain or moisture.
To prevent electric shock, do not open the case. Only qualified personnel may carry out repairs.
Do not placed the radio in water, or close to fire.
Please do not allow children access to the radio when it is charging.
Package Information
Specification
Frequency Range: FM Band FM: 87.0MHz - 108.0MHz Step: 0.1MHz
AM Band 520kHz -1710kHz Step: 10kHz
NOAA Weather Band
CH1 162.400MHz
CH2 162.425MHz
CH3 162.450MHz
CH4 162.475MHz
CH5 162.500MHz
CH6 162.525MHz
CH7 162.550MHz
Power Battery: 3.6V|650mAh Rechargeable Ni-MH Batteries
AA Batteries x 5 (Optional)
Speaker: Inner-magnet 4Ω | 3W | Φ2 inches
Max Consumption: About 500mA
LCD Backlight: Yellow, 10s maintain
Dimension: 7¼(L) x 2(W) x 5½(H) inches
Net Weight: 1 lb (include built-in batteries)
MP3 Player: MP3 format Supports, Storage Capacity Max 32GB
KA346 Emergency Radio
User’s Manual
Product Registration Form
USB Charge Cable
Kaito Electronics, Inc.
Tel: 909.628.6088
Fax: 909.628.7999
E-mail: [email protected]
Website: www.kaito.us
Address: 5185 Cliffwood Dr, Montclair,
CA 91763, U.S.
Copyright © Kaito Electronics, Inc. All Rights Reserved. Paint in China Ver 0.1
For service and questions, please visit our website: www.kaito.us,
or email us at [email protected]
4. Setup the Sleep Timer
5. Using the Flashlight
6. Using the Crank Dynamo
7. Using the Line-in Jack
8. Using the Radio
9. Using the MP3 Player to play the SD-Card or USB Thumb Drive
10. How to Recharge the Built-in Rechargeable Batteries
In the standby mode of the radio, long press the ON|OFF button. The radio will display the sleep timer symbol in the top-right
conner of the LCD screen. It also shows the default value of the sleep timer setting time of 90 minutes. It means that after 90 minutes,
the radio will automatically open and go into radio mode. Continue to press the ON|OFF button to adjust the time, you can choose
the amount of time from 90 to 10 minutes. After setup, this sleep timer function will be run. When the time comes due, the radio will
power itself off automatically.
When activating this sleep timer, it only works one time, and it needs to be reset every time in you use it.
Sliding the flashlight switch to the LIGHT ON position on the front-upper of the radio, the 3-LED flashlight will be on. Slide the
flashligh switch to this OFF position, the 3-LED flashlight will turn off.
Pull out the dynamo crank handle from its recessed holder on left side of the radio, and turn the crank handle a steady speed to
generate power and charge the built-in rechargeable Ni-MH batteries or directly output to the 5V DC-out USB port. When doing this,
turn off the radio and charging will be much more efficient. 3 - 5 minutes of cranking will supply 10 - 15 minutes of radio play time.
(approx values)
Connect your cellphone or other mobile devices with your USB charging cable via the full size DC-out USB port on the radio. Turn
the crank handle at a steady speed. The radio will be charged directly to your mobile devices in emergency situations, without any
other power source. Please note the DC-out USB port output voltage is DC 5V.
Connect your audio devices and insert the audio cable into the
Φ
3.5mm LINE-IN input jack on right side in the radio, then turn on
the radio, it will play the audio sound from your audio sources priority. Its conforms to the AUX specification.
Short press the power ON|OFF button on the radio. Into the radio function mode, turn the volume control knob to adjust the play
back volume to ready listens it.
Short press the FM|TIME SET button to into FM band. Before that, make sure the telescopic antenna is extended up. And uses the
TUNING encoder to find the stations you want.
Short press the AM| MP3 button, the radio will be into AM band. You can get AM stations. And use the TUNING encoder to find
the stations you want.
Short press the WB|ALERT button, the radio will be into the NOAA Weather band and you can get the weather station. And use the
TUNING encoder to find the weather station in local you want.
Rotate the TUNING encoder to change the radio frequency to find the stations you want, the stations frequency will display on the
LCD screen. Turn off the radio function by short pressing the power ON|OFF button.
Whether the radio in the standby or radio works mode, long press the WB|ALERT button will into the NOAA weather alert
function immediately, the “ALE” warning symbol will be flashing on the LCD screen, the radio will be always scanning the
NOAA Weather alert signals automatically in local, until the released weather alert forecast was searched and playing it.
When you short press the WB|ALERT button again, the radio will be scanning the NOAA Weather alert signals again, Until you
long press the WB|ALERT button to exit the scan and back to WB band.
When use the WB Alert function, please ensure that sufficient batteries power is in the radio, prevent the radio from shut
down due to insufficient power.
Insert the SD-card into the SD Slot or insert the USB thumb drive into the USB slot, short press the power ON|OFF button, to turn
on the radio.
Then long press AM| MP3 button, the radio will be enter into MP3 player playback mode, the MP3 player will playback the
medium you choose in the songs of the MP3 format. Use the BACKWARD or PLAY|STOP or FORWARD buttons to control and select
the MP3 music you want. In MP3 playback mode, you can long press the AM| MP3 button again, back to the radio. You can only use
SD-card or USB thumb drive at a time.
You can any 5V USB charger to charge this radio. Just connect the radio via a cable to a USB charger or Computer USB port, it will
charging the built-in rechargeable batteries of the radio. When the radio is in charging, the radio’s red charge indicator will be lit.
*1
*1
*1
*1
©2017 Kaito. Kaito and other Kaito marks are owned by Kaito Electronics, Inc. and may be registered. All other trademarks are
the property of their respective owners.
