34
EN
• Within 15 seconds after the cooker hood
connects to power supply, press and hold button
1
for 5 seconds, the indicators light begin
flashing, the cooker hood is in connection mode.
•
Touch the button
2
to start the engine. The engine
runs at 1st, lowest speed.
Connecting the remote control*
• If need to connect again, first clear the previous
connection.
• Press any button on remote control to confirm the
connection. The connection process finished.
• To clear the connection press and hold button
1
for 5 seconds, the indicators light begin flashing,
the cooker is in disconnection mode.
• The previous code has been cleared, c o o k e r
hood is back to standby mode.
Usage of the remote control
• Then, press and hold button for 5 seconds
1
again, the previous connection code is cleared.
* - if available
•
Touch the button
4
to start the timer during the
motor is working. The timer is programmed for 9
minutes.
•
On the lowest speed touch the button
3
to stop
the engine.
•
To increase to 2nd or 3rd speeds, touch the button
2
again.
•
To decrease the speed, touch the button
3
.
•
The button
5
is used to turn on and off the
extraction hood lighting; independently of the
engine work status. Touch this button to switch
on/ off the lighting.
2
5
4
3
1
