Undercounter Refrigerators and Freezers
PAGE 10
7. MIcRoPRocEssoR contRol
Your new refrigerator or freezer cabinet is equipped with a state-of-the-art microprocessor
control, which precisely regulates operation and provides alarms when problems occur.
It is supplied from the factory completely ready for use and requires no adjustments, but
without the audible alarms activated. See pages 10 thru 16 for more information.
FREEZER
SET
INTELA-TRAUL
°F
°C
7A - contRol FEAtUREs:
Internal time clock
• Eliminates external defrost time clock.
• Defrost cycle can be quickly adjusted to suit individual location and use.
• Must be set at power-up. (See page 11, “Setting the 24-Hour Clock”)
• Will automatically update for Daylight Savings Time.
Water Resistant Housing
The face of the control is water resistant to provide for protection during cleaning.
Parameter/service levels
See “Customer / Service Parameters” on Page 9.
defrost lockouts
- See “Setting Defrost Lockouts” on page 14.
Customers can set up to 4 different defrost lockout periods. The lockout prevents the unit
from going into a defrost cycle during peak kitchen use. Note: The 24-hour clock must
be set for this feature to operate correctly.
Anti-condensate door Perimeter Heater control
The “No-Sweat” feature is an energy savings system that allows the customer to adjust the
percent of time for the door/drawer heater to be “On” as needed for the prevailing ambient
conditions (from 0 - 100% of the time each day). It is used to prevent condensation from
forming around the perimeter of the drawers. The factory default setting is 100%. Adjust
this set point down to a point just before condensation forms to save energy.
MIcRoPRocEssoR
contRol
