34
With the stop dogs on the back of the magnet, you can align and adjust the
corresponding angles of your tools by use of a angled blade.
2.
DRESSING OF THE CORUNDUM CUP WHEEL
•
Place the magnet with the plat side on the permanent magnet table (see picture).
•
Place the dresser unit with a little angle to the grinding wheel on the magnetic
table.
•
Place 2 metal stops on the left and right side of the dresser unit. This grants a soft
smooth dressing of grinding wheel.
•
Adjust the magnetic table to an angle of 2°.
•
The feeding should be max. 2-3 graduation lines on the motor feed.
•
By moving of the guiding carriage, the wheel is dressed.
•
When dressing the grinding wheel, please conect a dust exhaust
(e. g. industrial vacuum).
Dresser device
Metal stop dogs