3.
GENERAL SAFETY ADVISE
When working with the through looking grinding machine SM 180, always wear your
protection glasses!
The looking through grinding machine has been designed and constructed under
consideration of an endangering analyses and careful selection of oberved harmonized
norms, as well as further technical specifications. The SM 180 meets the state of the art and
grants a maximum of safety.
This safety can only be achieved in daily work, when all necessary steps are taken. It is the
duty of taking care by user to plan and control these steps.
The operator in particular has take care that:
•
the machine is used as directed (see chapter "Description")
•
the machine is use in flawless condition, expecially that the safety installations are
checked regularly for function
•
requested personal security equipment for the operator is avaiilable and used
•
the operation manual is always kept in a readable condition, complete and available
near the machine
•
all safety and warning instructions are not removed from the machine and kept
readable
The grinding machine is only operated by personnel, who knows the operation manual and
work with correspondingly.
Moving to another place by handcarry of the SM 180. Here grap the columns between uper
and lower housing. Net weight: 9 Kg.
Place on a working table with height of approx. 80-95 cm. Take care for a safe stand.
The SM 180 can also be screwed on the working table. Please see the 3 boring holes on the
buttom of the machine.
Temperature: from +5 to +50° Celsius
Humidity: from 90%, not condensing
4.
DUTY OF TAKING CARE BY USER
5.
REQUIREMENT TO THE OPERATING PERSONNEL
6.
MOVING
7.
SET UP
8.
ENVIRONMENTAL CONDITIONS FOR SET UP
5
