OC Series - Automatic coffee machines
- 8 -
5. Press the ‘STOP’ button
The display will show
Preset enabled
Set to Preset enabled
6. Press the ‘STOP’ button
The display will show
Size = XXX
Press , + or -
7. Place a 1 litre measuring beaker below the outlet nozzle and press the
‘Jug’ button.
Water will be dispensed into the beaker; when the water level is
around 900ml then press the ‘Jug’ button again. The water will
continue to flow for a short time until approximately 1litre has been
dispensed. (Note the ‘Size’ number shown in the display for use as a
guide).
8. If the volume dispensed is below 1 litre, press the ‘Cup’ button to add
water or the ‘Water’ button to decrease the water to the next try (Note
use the ‘Size’ number shown in the display as a guide, initially adjust in
steps of 10, then smaller steps as you get closer to 1 litre).
9. Press the ‘STOP’ button
The display will show
Strength =
XX:1
10. Use the ‘Water’ or ‘Cup’ button as necessary to set the strength to
20:1
11. Switch off the dispenser with the red power button on the rear of the
dispenser,
Pressing the ‘Jug’ button
toggles between enabled
and disabled.
