KAESER SM 7.5, Руководство оператора

Страница: 46 / 128

6.2 Reporting Transport Damage
1. Check the machine for visible and hidden transport damage.
2. Inform the carrier and the manufacturer in writing of any damage without delay.
6.3 Connecting the machine with the compressed air network
Condensate in the compressed air network can damage the pipework:
➤ Install only corrosion-resistant pipes.
➤ Use fluoroelastomers as sealing material for seals.
➤ Note the electro-chemical voltage sequence.
➤ Consult with KAESER for suitable materials for the compressed air network.
Precondition The compressed air system is vented completely to atmospheric pressure.
Fig. 12 Compressed air pipework
1
Flexible pressure hose
2
Shut-off valve
➤ Do not induce any forces into the machine for which the compressive forces must be bal‐
anced by bracing.
1.
Serious injury or death can result from loosening or opening components under
pressure.
➤ Vent all pressurized components and chambers completely.
2. A shut-off valve must be installed by the user in the connection line.
3. Connect a flexible pressure hose.
Further information The dimensional drawing in chapter 13.3 provides the size and position of the connection ports.
6.4 Connecting the external pressure transducer
Material Retrofit kit: "External pressure transducer SIGMA CONTROL 2 "
Use suitable shielded, copper-core cable (e.g.: LIYCY 2 x0.75 mm
2
for ambient temperature up to
30°C and laying method C).
Precondition The power supply disconnecting device is switched off,
the device is locked off,
the absence of any voltage has been verified.
Cable length between the machine and the pressure transducer: < 98 ft.
6 Installation
6.2 Reporting Transport Damage
36
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2
9_5875 33 USE