KAESER M 64 Скачать руководство пользователя страница 106

Страница: 106 / 344

10.2.3.1 Machine maintenance schedule

➤ Carry out maintenance tasks according to the following schedule.

Component:
Task

Daily

A250

A500

A1000

A1500

A2000

A3000

A36000

See chapter

Note

Engine:
Check inlet air filter mainte‐

nance indicator

10.3.2

Check the oil level.

10.3.4

Replace the engine oil.

10.3.6

Replace the engine oil filter.

10.3.7

KS , FW

Clean the engine air filter.

10.3.2

KS , FW

Replace the engine air filter.

10.3.2

Check/adjust the drive belt ten‐

sion.

10.3.8

KS , FW

Replace the drive belt.

10.3.8

KS , FW

Check the engine coolant level.

10.3.1

KS , FW

Clean the cooler.

10.5

Have coolant hoses and clamps

checked.

KS , FW

Check antifreeze concentration.

10.3.1

KS , FW

Change the coolant.

10.3.1

KS , FW

Remove deposits within the wa‐

ter cooler.

Fill up the fuel tank

Check/empty the fuel water trap. X

10.3.3

Check fuel lines and hose

clamping bands, have replaced

if necessary.

KS , FW

Replace fuel lines and clamps.

KS , FW

Clean the fuel micro-filter.

10.3.3

KS , FW

Change the fuel pre-filter.

10.3.3

Replace the fuel fine filter.

10.3.3

KS , FW

Check the fuel tank for dirt and

clean, if necessary.

Clean the tank fuel strainer.

Check fuel tanks for secure fix‐

ing.

10.3.10

KS ≙ contact KAESER SERVICE,

FW ≙ contact specialised workshop

10 Maintenance

10.2 Following the maintenance plans

Operator manual Portable compressor
M 64

No.: 9_5898 26 E

RAMIRENT

Содержание M 64

























































































































































































































































































































































Результаты поиска

Содержание M 64

Отзывы:

Похожие инструкции для M 64

Бренды по названию

Популярные бренды

KAESER M 64, Руководство оператора

Результаты поиска

Содержание M 64

Отзывы:

Похожие инструкции для M 64

Бренды по названию

Популярные бренды