KAESER KOMPRESSOREN EPC 1000-2-G, Сборка и руководство по эксплуатации

Страница: 44 / 96

Fig. 13 Suggested Safety and Control Devices
1
Air receiver
2
Pressure switch
3
Check valve
4
Flexible hose to the machine
5
Pressure relief valve
6
Test flange
7
Pressure gauge
8
Compressed air outlet
9
Compressed air inlet
10
Shut-off valve for condensate drainage
11
Nozzle (machine-dependent)
➤ Install safety and regulating devices at the user side of the compressed air network or directly on
the compressed air container.
6.6 Connecting the Power Supply
Precondition The machine is disconnected from all power supply phases.
The disconnecting device is locked in the off position.
A check has been made that no voltage is present.
1. Have the power supply connected only by authorized installation personnel or an authorized
electrician.
2. Carry out safety measures as stipulated in relevant regulations (IEC 364, for example or
DIN VDE 0100) and in national accident prevention regulations (BGV A3 in Germany). In addition,
observe the regulations of the local electricity supplier.
6 Installation
6.6 Connecting the Power Supply
34
Assembly and operating manual 2-stage piston compressor
EPC-2-G
No.: 9_5753_04 E