9
© 2017 Infinite Electronics, Inc., All Rights Reserved.
1
Power On/Off Button
Power on turns on the iVA unit. A short touch will turn on the iVA, indicated by a Green LED (See item 3). A long touch
until the Tx Rx activity LEDS flash then release will turn the iVA off.
2 Bluetooth Activity LED
Indicates when Bluetooth signaling is active
• Solid Blue indicates connected
• Flashing indicates disconnected
3 Power On/ Charge LED’s
Solid orange indicates charging. Green indicates switched on.
4 Tx, Rx Activity LED’s
Indicates when Transmit (Red led) or Receive (Green led) is active.
5 RF Input /Output Port
N Type connector.
6 USB Port
USB Port covered by a protective splashproof cover. Charging the iVA battery is done through the USB port. Connection
to your charger is done through the USB port.
7 Protective Cover
Protective cover for the RF Input Output connector.
8 Lifting Lug
Provides a fastening point for a lanyard or line to help prevent the unit being dropped, and support the measurement head
near the cable end or measurement point.
9 Protective Cover Retaining Hook
Provides a fastening point to hook on the protective cover to keep it out of the way while connecting and making
measurements.
6
8
4
1
2
3
5
9
7
Figure 1 iVA Equipment View